Juniper Day One Plus SRX380 - Customize the Basic Configuration

Customize the Basic Configuration
To customize basic settings using the J-Web Setup wizard, have these values handy:
•
Hostname
•
Root authentication password
•
IP address for the NTP server
•
IP address for the DNS server
•
IP address for the management interface
1. In the J-Web application, select Configure > Setup Wizard. The Setup wizard opens on your screen.
2. Select the configuration mode that’s right for you and then follow the screens as they appear in the Setup wizard:
•
Standard—Configure basic security settings for the SRX380.
•
Cluster (HA)—Set up the SRX380 in chassis cluster mode.
•
Passive—Set up the SRX380 in Tap mode. Tap mode enables the SRX380 to passively monitor traffic flows across
a network.
8