Policy Management show Commands ! 131
Chapter 5: Monitoring Policy Management
! color—Explicit color applied to packet flow for queuing; green, yellow, or
red:
" Packets logged—Number of packets colored
" Bytes logged—Number of bytes colored
! next hop—Address of the next-hop destination:
" Packets transmitted—Number of packets sent to the next-hop address
" Bytes transmitted—Number of bytes sent to the next-hop address
! forward—Number of packets and bytes forwarded because of the CLACL
! rate-limit-profile—Name of the rate-limit profile
" committed—Number of packets and bytes within the committed rate
limit
" conformed—Number of packets and bytes exceeding the committed
rate limit but within the peak rate
" exceeded—Number of packets and bytes exceeding the peak rate
" action—Action performed on the packets matched by the rules in the
rate-limit profile
! Example 1
host1#show ip interface serial 2/1:28/24.1
serial2/1:28/24.1 is up, line protocol is up
Network Protocols: IP
Internet address is 172.24.1.101/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 1600 Administrative MTU = 0
Operational speed = 155520000 Administrative speed = 0
Discontinuity Time = 14695
Router advertisement = disabled
Administrative debounce-time = disabled
Operational debounce-time = disabled
Access routing = disabled
In Received Packets 15, Bytes 3135
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
Out Forwarded Packets 0, Bytes 0
Out Scheduler Drops Packets 0, Bytes 0
IP Policy input pl28241
Classifier-group clacl28241X01 entry 1
0 packets, 0 bytes
exception http-redirect
Classifier-group clacl28241X01 entry 1
0 packets, 0 bytes
filter
Classifier-group clacl28241X02 entry 1
1 packets, 202 bytes
filter
Classifier-group clacl28241X03 entry 1
1 packets, 203 bytes
filter
Classifier-group clacl28241X04 entry 1
1 packets, 204 bytes
filter
To Next Page
Loading...
Need help?
General
