EasyManuals Logo

Juniper EX3400 User Manual

Juniper EX3400
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
You’ll notice there are three locations on the side panel where you can attach the mounting brackets: front, center,
and rear. Attach the mounting brackets to the location that best suits where you want the EX3400 switch to sit in the
rack.
3. Lift the EX3400 switch and position it in the rack. Line up the bottom hole in each mounting bracket with a hole in
each rack rail, making sure the EX3400 switch is level.
4. While you’re holding the EX3400 switch in place, have someone insert and tighten the rack mount screws to secure
the mounting brackets to the rack rails. Make sure to tighten the screws in the two bottom holes first and then tighten
the screws in the two top holes.
5. Check that the mounting brackets on each side of the rack are level.
4

Other manuals for Juniper EX3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3400 and is the answer not in the manual?

Juniper EX3400 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
SafetyUL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor1U
Product colorBlack
Electromagnetic compatibilityFCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity4
QSFP+ module slots quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
Memory typeDRAM
Noise level35 dB
Flash memory2000 MB
Processor frequency1000 MHz
Virtual stacking (units)10
Throughput250 Mpps
Jumbo frames9216
MAC address table32000 entries
Number of VLANs4093
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPort-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)120 W
Number of power supply units1
Operating altitude0 - 3048 m
Non-operating altitude3048 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP featuresDHCP server, DHCP client
AuthenticationMAC-based authentication, Port-based authentication
Security algorithms802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology1000BASE-X
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width437 mm
Height44 mm
Weight5740 g

Related product manuals