Need help?Do you have a question about the Juniper EX3300 Series and is the answer not in the manual?
General| Layer Support | Layer 2 and Layer 3 |
|---|---|
| JUNOS OS | Yes |
| Ports | 24 or 48 x 10/100/1000BASE-T ports |
| Uplink Ports | 4 x 1GbE/10GbE SFP/SFP+ ports |
| Power Supply | AC or DC options |
| Stacking | Yes, up to 10 units |
| MAC Address Table Size | 32, 000 |
| Operating Humidity | 10% to 90% non-condensing |
| PoE Support | Available on PoE models |
| Virtual Chassis | Yes, up to 10 units |
| Operating Temperature | 32° to 104° F (0° to 40° C) |
Overview of the EX3300 switch hardware features and capabilities.
Details the functionality and operation of the LCD panel on the EX3300 switch.
Details optical interface support for SFP and SFP+ transceivers on EX3300 switches.
Summarizes tasks for preparing a site for EX3300 switch installation.
Step-by-step guide for installing and connecting the EX3300 switch.
Instructions for connecting AC power to the EX3300 switch safely.
Guide for initial switch configuration using the command-line interface.
Procedure for safely removing an SFP transceiver from an EX Series switch.
Procedure for returning EX3300 switches or components for service.
Essential safety guidelines and warnings for device handling and operation.
Safety guidelines and warnings related to laser and LED devices in EX Series switches.
Warning to read installation instructions before connecting the device to power.
General safety guidelines and warnings for electrical power handling.
Lists agency approvals and standards that EX Series switches comply with.
To Next Page