Juniper EX3300 Series User Manual

CHAPTER 6
Cable Specifications
•
Network Cable Specifications for EX3300 Switches on page 53
Network Cable Specifications for EX3300 Switches
EX3300 switches have interfaces that use various types of network cables.
For instructions on connecting the switch to a network for out-of-band management
using an Ethernet cable with an RJ-45 connector, see “Connecting an EX Series Switch
to a Network for Out-of-Band Management” on page 95.
For instructions on connecting the switch to a management console using an Ethernet
cable with an RJ-45 connector, see “Connecting an EX Series Switch to a Management
Console” on page 96.
For instructions on connecting a fiber-optic cable to the switch, see “Connecting a
Fiber-Optic Cable to an EX Series Switch” on page 103.
Related
Documentation
• Management Port Connector Pinout Information for an EX3300 Switch on page 28
• Console Port Connector Pinout Information for an EX Series Switch on page 27
• Front Panel of an EX3300 Switch on page 6
• Rear Panel of an EX3300 Switch on page 7
53Copyright © 2011, Juniper Networks, Inc.

Juniper EX3300 Series Specifications

General

Layer Support	Layer 2 and Layer 3
JUNOS OS	Yes
Ports	24 or 48 x 10/100/1000BASE-T ports
Uplink Ports	4 x 1GbE/10GbE SFP/SFP+ ports
Power Supply	AC or DC options
Stacking	Yes, up to 10 units
MAC Address Table Size	32, 000
Operating Humidity	10% to 90% non-condensing
PoE Support	Available on PoE models
Virtual Chassis	Yes, up to 10 units
Operating Temperature	32° to 104° F (0° to 40° C)