Locating the Chassis Serial Number ID Label on an EX3300 Switch
EX3300 switches have serial number ID labels located on the rear panel of the chassis
(see Figure 46 on page 127).
Figure 46: Location of the Serial Number ID Label on EX3300 Switches
g021214
MGMT
CON
EX3300-24T-DC REV: 02
750-034256 REV: 02
Mfg. Date
MAC: 28-C0:DA:40:A2:80
20101226
SN: GC0210537655
MADE IN CHINA
Serial number ID label
Related
Documentation
Contacting Customer Support to Obtain Return Materials Authorization for EX Series
Switches on page 127
•
• Returning an EX3300 Switch or Component for Repair or Replacement on page 125
Contacting Customer Support to Obtain Return Materials Authorization for EX Series
Switches
If you are returning a switch or hardware component to Juniper Networks for repair or
replacement, obtain a Return Materials Authorization (RMA) from Juniper Networks
Technical Assistance Center (JTAC).
After locating the serial number of the switch or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
For instructions on locating the serial number of the switch or hardware component you
want to return:
•
See Locating the Serial Number on an EX2200 Switch or Component.
•
See Locating the Serial Number on an EX3200 Switch or Component.
•
See “Locating the Serial Number on an EX3300 Switch or Component” on page 126.
•
See Locating the Serial Number on an EX4200 Switch or Component.
•
See Locating the Serial Number on an EX4500 Switch or Component.
•
See Locating the Serial Number on an EX6200 Switch or Component
•
See Locating the Serial Number on an EX8200 Switch or Component.
•
See Locating the Serial Number on an XRE200 External Routing Engine or Component.
Before you request an RMA from JTAC, be prepared to provide the following information:
127Copyright © 2011, Juniper Networks, Inc.
Chapter 15: Returning the Switch or Switch Components
To Next Page
Loading...
Need help?
General
