CHAPTER 17
Radiation and Laser Warnings
•
Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 139
•
Radiation from Open Port Apertures Warning on page 141
Laser and LED Safety Guidelines and Warnings for EX Series Switches
EX Series switches and the XRE200 External Routing Engine are equipped with laser
transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration and are evaluated as a Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 139
•
Class 1 Laser Product Warning on page 139
•
Laser Beam Warning on page 140
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
139Copyright © 2011, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
