• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 110
Parts Inventory (Packing List) for an EX3300 Switch
The EX3300 switches are shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1–800–638–8296. For international-dial or direct-dial options in countries without
toll-free numbers, see http://www.juniper.net/support/requesting-support.html.
Table 27 on page 67 lists the parts and their quantities in the packing list.
Table 27: Parts List for an EX3300 Switch
QuantityComponent
1Switch with built-in power supply
1AC power cord appropriate for your geographical location (only for AC switch models)
1Power cord retainer clip (only for AC switch models)
2Mounting brackets
8Mounting screws to attach the mounting brackets to the switch chassis
4Rubber feet
1RJ-45 cable and RJ-45 to DB-9 serial port adapter
1Quick Start installation instructions
1Juniper Networks Product Warranty
1End User License Agreement
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to mount the chassis on a rack or a cabinet.
Related
Documentation
Unpacking an EX3300 Switch on page 66•
• EX3300 Switches Hardware Overview on page 3
67Copyright © 2011, Juniper Networks, Inc.
Chapter 9: Installing the Switch
To Next Page
Loading...
Need help?
General
