Juniper EX3300 Series User Manual

CHAPTER 20
Compliance Information
•
Agency Approvals for EX Series Switches on page 175
•
Compliance Statements for EMC Requirements for EX Series Switches on page 176
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 178
•
Declaration of Conformity for EX3300 Switches on page 179
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 (2007) Information Technology Equipment
•
UL 60950-1 (2nd Ed.) Information Technology Equipment
•
EN 60950-1 (2006) Information Technology Equipment
•
IEC 60950-1 (2005) Information Technology Equipment
•
EN 60825-1 (2007) Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
175Copyright © 2011, Juniper Networks, Inc.

Juniper EX3300 Series Specifications

General

Layer Support	Layer 2 and Layer 3
JUNOS OS	Yes
Ports	24 or 48 x 10/100/1000BASE-T ports
Uplink Ports	4 x 1GbE/10GbE SFP/SFP+ ports
Power Supply	AC or DC options
Stacking	Yes, up to 10 units
MAC Address Table Size	32, 000
Operating Humidity	10% to 90% non-condensing
PoE Support	Available on PoE models
Virtual Chassis	Yes, up to 10 units
Operating Temperature	32° to 104° F (0° to 40° C)