EasyManuals Logo

Juniper EX3300 Series User Manual

Juniper EX3300 Series
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
DC Power Grounding Requirements and Warning
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
An insulated grounding conductor that is identical in size to the grounded and ungrounded
branch circuit supply conductors but is identifiable by green and yellow stripes is installed
as part of the branch circuit that supplies the device. The grounding conductor is a
separately derived system at the supply transformer or motor generator set.
WARNING: When you install the device, the ground connection must always
be made first and disconnected last.
Waarschuwing Bij de installatie van het toestel moet de aardverbinding altijd
het eerste worden gemaakt en het laatste worden losgemaakt.
Varoitus Laitetta asennettaessa on maahan yhdistäminen aina tehtä
ensiksi ja maadoituksen irti kytkeminen viimeiseksi.
Attention Lors de l'installation de l'appareil, la mise à la terre doit toujours
être connectée en premier et déconnectée en dernier.
Warnung Der Erdanschluß muß bei der Installation der Einheit immer zuerst
hergestellt und zuletzt abgetrennt werden.
Avvertenza In fase di installazione dell'unità, eseguire sempre per primo il
collegamento a massa e disconnetterlo per ultimo.
Advarsel Når enheten installeres, jordledningen alltid tilkobles først og
frakobles sist.
Aviso Ao instalar a unidade, a ligação à terra deverá ser sempre a primeira a
ser ligada, e a última a ser desligada.
¡Atención! Al instalar el equipo, conectar la tierra la primera y desconectarla
la última.
Varning! Vid installation av enheten måste jordledningen alltid anslutasförst
och kopplas bort sist.
Related
Documentation
General Safety Guidelines and Warnings on page 133
General Electrical Safety Guidelines and Warnings on page 157
DC Power Electrical Safety Guidelines on page 162
DC Power Disconnection Warning on page 164
DC Power Wiring Sequence Warning on page 167
DC Power Wiring Terminations Warning on page 168
Copyright © 2011, Juniper Networks, Inc.166
Complete Hardware Guide for EX3300 Ethernet Switches

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3300 Series and is the answer not in the manual?

Juniper EX3300 Series Specifications

General IconGeneral
Layer SupportLayer 2 and Layer 3
JUNOS OSYes
Ports24 or 48 x 10/100/1000BASE-T ports
Uplink Ports4 x 1GbE/10GbE SFP/SFP+ ports
Power SupplyAC or DC options
StackingYes, up to 10 units
MAC Address Table Size32, 000
Operating Humidity10% to 90% non-condensing
PoE SupportAvailable on PoE models
Virtual ChassisYes, up to 10 units
Operating Temperature32° to 104° F (0° to 40° C)

Related product manuals