Juniper J-Series

exz yellow;
los red;
ylw red;
}
ds1 {
ylw red;
}
ethernet {
link-down red;
}
serial {
loss-of-rx-clock red;
loss-of-tx-clock red;
dcd-absent yellow;
cts-absent yellow;
}
Meaning The sample output in this section displays the following alarm settings (in order).
Verify that the output shows the intended configuration of the alarms.
■ T3 alarms
■ DS1 alarms
■ Ethernet alarms
■ Serial alarms
Related Topics For more information about the format of a configuration file, see the J-series Services
Router Basic LAN and WAN Access Configuration Guide.
176 ■ Displaying Alarm Configurations
J-series™ Services Router Administration Guide