Verifying RPM Probe Servers
Purpose Verify that the Services Router is configured to receive and transmit TCP and UDP
RPM probes on the correct ports.
Action From the CLI, enter the show services rpm active-servers command.
user@host> show services rpm active-servers
Protocol: TCP, Port: 50000
Protocol: UDP, Port: 50037
Meaning The output shows a list of the protocols and corresponding ports for which the Services
Router is configured as an RPM server.
Related Topics For a complete description of show services rpm active-servers output, see the JUNOS
System Basics and Services Command Reference.
288 â– Verifying RPM Probe Servers
J-seriesâ„¢ Services Router Administration Guide
To Next Page
Loading...
Need help?
General
