Juniper J-Series Administration Guide

■ To apply the configuration and stay on the Quick Configuration page for
SNMP, click Apply.
■ To apply the configuration and return to the Quick Configuration SNMP page,
click OK.
■ To cancel your entries and return to the Quick Configuration for SNMP page,
click Cancel.
4. To check the configuration, see “Verifying the SNMP Configuration” on page 58.
Table 30: SNMP Quick Configuration Summary
Your ActionFunctionField
Identification
Type any contact information for the
administrator of the system (such as
name and phone number).
Free-form text string that specifies an
administrative contact for the system.
Contact Information
Type any system information that
describes the system (J4300 with 4 PIMs,
for example).
Free-form text string that specifies a
description for the system.
System Description
Type the MAC address of Ethernet
management port 0.
Provides an administratively unique
identifier of an SNMPv3 engine for
system identification.
The local engine ID contains a prefix and
a suffix. The prefix is formatted
according to specifications defined in
RFC 3411. The suffix is defined by the
local engine ID. Generally, the local
engine ID suffix is the MAC address of
Ethernet management port 0.
Local Engine ID
Type any location information for the
system (lab name or rack name, for
example).
Free-form text string that specifies the
location of the system.
System Location
Type the name of the system.Free-form text string that overrides the
system hostname.
System Name Override
Click Add.
Communities
Type the name of the community being
added.
Specifies the name of the SNMP
community.
Community Name
Select the desired authorization (either
read-only or read-write) from the list.
Specifies the type of authorization (either
read-only or read-write) for the SNMP
community being configured.
Authorization
Click Add.
Traps
Type the name of the SNMP trap group
being configured.
Specifies the name of the SNMP trap
group being configured.
Trap Group Name
Configuring SNMP with Quick Configuration ■ 51
Chapter 3: Configuring SNMP for Network Management

Juniper J-Series Specifications

General

Brand	Juniper
Model	J-Series
Category	Network Router
Language	English