EasyManuals Logo

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 User Manual

Juniper JUNOS 10.1 - RELEASE NOTES REV 4
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
On SRX210 High Memory devices, only six logical interfaces was came up on
the G.SHDSL ATM interface (including OAM channel), and the other two logical
interfaces were down. [PR/466296: This issue has been resolved.]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, link speeds of 100
Mbps and 1 Gbps were not configured on the ae0 interface with child interfaces
configured because when you commited the configuration, the system displayed
an error that there was a mismatch between the ae0 and child interfaces.
[PR/482649: This issue has been resolved.]
On SRX210 High Memory devices, when the tunnel outgoing interface took a
long time to come up, the GRE tunnel sessions were not created properly. On
T1/E1 interfaces of SRX100, SRX210, SRX240, and SRX650 devices, the traffic
through the GRE tunnel would not work. [PR/497864: This issue has been
resolved.]
On SRX240 devices, when the ATM interface for the VDSL PIM inserted on slots
two, three, or four was activated or deactivated, a flowd crash might have
occurred due to the bug in the VDSL driver. [PR/505347: This issue has been
resolved.]
J-Web
On SRX Series devices in J-Web, when Troubleshoot was clicked twice, the
left-side menu items and page content disappeared. [PR/459936: This issue has
been resolved.]
Management and Administration
On SRX3400 and SRX3600 devices, when the central point or SPU session table
was full, the minor alarm was not triggered. [PR/405990: This issue has been
resolved.]
USB Modem
On SRX100, SRX210, SRX240, and SRX650 devices, the call terminated when
you removed and inserted a USB modem. [PR/491820: This issue has been
resolved.]
WLAN
On SRX Series devices, when WLAN configuration was committed, it took a long
time for the configuration to be reflected on the access point, depending on the
number of virtual access points and the number of access points connected.
[PR/450230: This issue has been resolved.]
Related Topics New Features in JUNOS Release 10.1 for SRX Series Services Gateways and J
Series Services Routers on page 107
Known Limitations in JUNOS Release 10.1 for SRX Series Services Gateways and
J Series Services Routers on page 132
164 Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
JUNOS 10.1 Software Release Notes

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS 10.1 - RELEASE NOTES REV 4 and is the answer not in the manual?

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS 10.1 - RELEASE NOTES REV 4
CategorySoftware
LanguageEnglish

Related product manuals