EasyManuals Logo

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 User Manual

Juniper JUNOS 10.1 - RELEASE NOTES REV 4
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
User Interface and Configuration
The show system statistics bridge command displays system statistics on MX
Series routers. [System Basics Command Reference]
VPNs
The mac-tlv-receive and mac-tlv-send statements were removed from Release 10.0
of the JUNOS Software and are no longer visible in the [edit logical-systems
logical-system-name routing-instances routing-instance-name protocols vpls] and
[edit routing-instances routing-instance-name protocols vpls] hierarchy levels.
Although the mac-tlv-receive and mac-tlv-send statements are recognized in the
current release, they will be removed in a future release. We recommend that
you update your configurations and use the mac-flush statement described in
the Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series,
MX Series, and T Series Routers section of the release notes.
[VPNs]
The JUNOS Software substantially supports the following RFCs for Layer 2 circuits,
as well as the Internet drafts listed in the published documentation:
RFC 4447, Pseudowire Setup and Maintenance Using the Label Distribution
Protocol (LDP)
The JUNOS Software does not support Section 5.3, The Generalized PWid
FEC Element.
RFC 4448, Encapsulation Methods for Transport of Ethernet over MPLS
Networks
[Hierarchy and Standards Reference]
In Chapter 19 Configuring VPLS of the VPNs Configuration Guide, an incorrect
statement that caused contradictory information about which platforms support
LDP BGP interworking has been removed. The M7i router was also omitted from
the list of supported platforms. The M7i router does support LDP BGP
interworking.
[VPNs]
Related Topics New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
on page 6
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series,
MX Series, and T Series Routers on page 42
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers on
page 54
Upgrade and Downgrade Instructions for JUNOS Release 10.1 for M Series, MX
Series, and T Series Routers on page 98
Errata and Changes in Documentation for JUNOS Software Release 10.1 for M Series, MX Series, and T Series Routers 97
Errata and Changes in Documentation for JUNOS Software Release 10.1 for M Series, MX Series, and T Series Routers

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS 10.1 - RELEASE NOTES REV 4 and is the answer not in the manual?

Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS 10.1 - RELEASE NOTES REV 4
CategorySoftware
LanguageEnglish

Related product manuals