Juniper MX2020 User Manual

MX2020 3D Universal Edge Router
Quick Start
January 2015
Part Number: 530-053305
Revision 01
This document describes how to install the Juniper Networks
®
MX2020 3D Universal
Edge Router.
Contents
MX2020 Quick Start Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 1: Prepare the Site for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rack-Mounting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Moving Requirements and Guidelines Using a Router Transport Kit . . . . . . . . 6
Tools Required to Unpack and Prepare the MX2020 Router for
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 2: Install the Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Step 3: Install the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Unpack the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Remove Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Install the Router Using a Pallet Jack with Attachment . . . . . . . . . . . . . . . . . 22
Install the Pallet Jack Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Use a Pallet Jack with Attachment to Install the Router in the Rack . . . . 24
Install the Router Using a Router Transport Kit . . . . . . . . . . . . . . . . . . . . . . . . 28
Unpack the Router Transport Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Install the Router Transport Kit onto the Router . . . . . . . . . . . . . . . . . . . 30
Use the Transport Kit to Install the Router in the Rack . . . . . . . . . . . . . . . 32
Step 4: Connect the Grounding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Step 5: Reinstall Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Step 6: Connect External Devices and Line Card Cables . . . . . . . . . . . . . . . . . . . . 45
Connect to a Network for Out-of-Band Management . . . . . . . . . . . . . . . . . . 45
Connect a Management Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Connect the Line Card Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Step 7: Connect Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Connect Power to a Three-Phase Delta AC Power Distribution Module . . . . . 47
Connect Power to a Three-Phase Wye AC Power Distribution Module . . . . . . 51
Connect AC Power Supply Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Connect Power to a DC Power Distribution Module . . . . . . . . . . . . . . . . . . . . 58
1Copyright © 2015, Juniper Networks, Inc.

Juniper MX2020 Specifications

General

Slots	20
Operating System	Junos OS
Form Factor	Modular
Chassis Type	Modular
Weight (approximate)	600 lb (272.2 kg)
Supported Interfaces	10G, 40G, 100G
Routing Protocols	BGP, IS-IS, OSPF, RIP
Routing Engine	Dual Routing Engines
Power Supply	AC or DC
Power Supply Options	AC, DC

Summary

Prepare the Site for Installation

Rack-Mounting Requirements

Install the Mounting Hardware

Install the Router

Unpack the Router

Install the Router Using a Pallet Jack with Attachment

Procedures for installing the router with a pallet jack attachment.

Install the Router Using a Router Transport Kit

Procedures for installing the router using the router transport kit.

Connect the Grounding Cable

Connect External Devices and Line Card Cables

Connect to a Network for Out-of-Band Management

Connect Power Cables

Connect Power to a Three-Phase Delta AC Power Distribution Module

Procedures for connecting power to a three-phase delta AC PDM.

Connect Power to a Three-Phase Wye AC Power Distribution Module

Procedures for connecting power to a three-phase wye AC PDM.

Connect AC Power Supply Modules

Connect Power to a DC Power Distribution Module

Connect DC Power Supply Modules

Perform Initial Software Configuration

Enter Configuration Mode

Steps to enter the router's configuration mode via CLI.

Configure User Accounts and Passwords

Configure System Attributes

Safety Warnings

Compliance Statements for NEBS

Compliance Statements for EMC Requirements