Meet the SRX300
The Juniper Networks
®
SRX300 Firewall provides next-generation security, routing, switching, and WAN connectivity in
a small desktop device. The SRX300 features eight 1GbE ports, including six RJ-45 network ports, and two small form-factor
pluggable (SFP) transceiver ports. It also has a USB 3.0 port (type A), and a console port (RJ-45+mini USB).
Install the SRX300 in a Rack
IN THIS SECTION
What’s in the Box? | 2
What Else Do I Need? | 2
Rack It | 3
You can install the SRX300 on a desktop, on a wall, or in a rack. This procedure shows you how to install it in a rack.
What’s in the Box?
•
SRX300 Firewall
•
A power cord appropriate for your geographic location
•
A USB cable
What Else Do I Need?
DB-9 to RJ-45 cable or a DB-9 to RJ-45 adapter with a CAT5E copper cable—We no longer include a DB-9 to RJ-45 cable
or a DB-9 to RJ-45 adapter with a CAT5E copper cable as part of the device package. If you require a console cable, you
can order it separately with the part number JNP-CBL-RJ45-DB9 (DB-9 to RJ-45 adapter with a CAT5E copper cable).
2
To Next Page
Loading...
