8
E6/E60 – Quick Reference Guide
T Place a receptacle under the fine foam frother.
T Turn the switch to the x position.
‘Machine is being descaled’ appears and water flows out of
the fine foam frother repeatedly.
The operation is interrupted, ‘Switch close’.
T Turn the switch to the ° position.
‘Machine is being descaled’, the descaling operation is
continued.
The operation is interrupted, ‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
T Empty the receptacle and place it under the fine foam fro-
ther and the coffee spout.
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Switch open’
T Turn the switch to the x position.
‘Machine is being descaled’, the descaling operation is con-
tinued.
The operation is interrupted, ‘Switch close’.
T Turn the switch to the ° position.
‘Machine is being descaled’, the descaling operation is con-
tinued. Water flows out of the coffee spout.
The operation is interrupted ‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.