Jura GIGA W10 - Page 25

7 Maintenance
25
T
 Remove the milk system from the dual spout�
E Do not lever the milk system back and forth to disconnect it
from the milk pipe connection� Remove the milk system
firmly to prevent it from tilting�
T
 Dismantle the milk system into its individual parts�
T
 Rinse all the parts under running water� If there are severely
dried-on milk residues, firstly immerse the individual parts in a
solution of 250ml water and one dosing unit of JURA milk
system cleaner� Then rinse the individual parts thoroughly�
T
 Reassemble the milk system�
T
 Fit the assembled individual parts back in the dual spout and
press it firmly�
T
 Fit the cover of the dual spout� Make sure the cover of the dual
spout is correctly engaged�