7 Maintenance
23
7 Maintenance
Basic information about maintenance:
U
You can manage the maintenance of your GIGA in the
‘Maintenance’ c area of the Cockpit�
U
If a maintenance programme needs to be initiated, the time
area on the start screen appears with a red background� Touch
the time area to open the JURA Cockpit� Here, maintenance
programmes that need to be carried out are shown in the form
of messages with red backgrounds� Touch a message to go
straight to the corresponding maintenance programme�
U
Carry out each maintenance programme when you are
prompted to do so�
You can start the rinsing process manually at any time�
Precondition:The start screen is displayed�
T
Place a receptacle under the dual spout�
T
Touch the time area to open the Cockpit�
T
Touch c�
T
Touch ‘Rinse’ to start the rinse operation�
The operation stops automatically�
8 minutes after milk preparation, the milk system is automatically
rinsed� Therefore always place a receptacle under the dual spout
after preparing milk�
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk�
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water�
T
Use only original JURA maintenance products�
E JURA milk system cleaner is available from specialised
dealers�
E Use the container supplied for milk system cleaning�
Precondition:The start screen is displayed�
Rinsing the machine
Automatic milk system
rinsing
Cleaning the milk system
CAUTION
To Next Page
Loading...
Need help?
General
