To Next PageTo Next Page
Need help?Do you have a question about the Jura GIGA X8c and is the answer not in the manual?
General| Water Tank Capacity | 5 L |
|---|---|
| Bean Container Capacity | 2 x 650 g |
| Power | 2300 W |
| Voltage | 220-240 V |
| Pump Pressure | 15 bar |
| Number of Grinders | 2 |
| Programmable Coffee Specialties | Yes |
| Coffee Specialties | Espresso, Coffee, Cappuccino, Latte Macchiato |
| Display | Color touchscreen display |
| Coffee Grounds Container Capacity | approx. 40 portions |
| Frequency | 50/60 Hz |
| Adjustable coffee spout height | 7 - 15.9 cm |
| Adjustable hot water spout height | 69-165 mm |
| Milk System | Yes |
Machine intended for specialist/trained staff in commercial facilities for coffee preparation.
Crucial safety guidelines for operating the machine, including electrical hazards and handling.
Information on the JURA website regarding the GIGA and coffee.
Preparations by qualified person for mains connection, power switch, water connection.
Advice on placing the GIGA for water sensitivity and avoiding overheating.
Instructions on filling bean containers, caution about treated coffee beans.
Guide through quick or standard installation, filter usage, and water hardness settings.
Steps for setting time, date, and basic setup for immediate use.
Steps for more detailed setup, including filter choice and water hardness.
Instructions on selecting filter usage and setting filter capacity.
Steps to deactivate the filter and configuration options only via JURA technician.
How to test water hardness using a test strip.
Instructions for connecting the milk pipe to the dual spout and milk cooler.
Overview of preparing drinks, touch of button vs. product selector.
Detailed steps for preparing drinks by pressing buttons.
Steps for selecting and preparing drinks using the rotary switch.
Explanation of bypass water amount and the speedometer symbol.
Instructions for using the filter funnel for ground coffee.
How to adjust and save preferred drink volumes for specific cups.
Enabling 'beans à la carte' mode for selecting grinders.
Steps for preparing coffee using the selected grinder.
Instructions for dispensing hot water and selecting temperature.
Process of switching on the machine, including automatic rinse.
Essential daily cleaning for components like drip tray and spout.
Steps for switching off the machine, including automatic rinsing.
Overview of navigation and available settings within the programming menu.
Options for 'Expert mode' and 'Classics' to customize drinks.
Details on setting coffee strength, amount, temperature, and product names.
How to change the names of pre-programmed drinks.
Customizing the start screen by adding favourite products.
Adjusting the grind consistency for both grinders independently.
Configuring filter options, water hardness, and rinse cycles.
How to adjust the machine's water hardness setting.
Adjusting the machine's power consumption settings for energy saving.
Setting the current time and date, including format options.
Programming automatic switch-on and switch-off times.
Configuring the automatic shutdown time after the last operation.
Changing measurement units for water amount and time format.
Resetting product or machine settings to their original factory defaults.
Selecting the display language for the machine.
Adjusting brightness, contrast, and backlight of the display.
Setting a custom background image for the start screen.
Viewing machine status, product counters, maintenance history, and software version.
Performing a rinse cycle for the coffee brewing system.
Performing a rinse cycle for the milk system after use.
Detailed instructions for thoroughly cleaning the milk system daily.
Step-by-step guide to disassemble and clean the dual spout.
Procedure for replacing the external water filter cartridge.
Running the internal cleaning program for the machine.
Instructions and precautions for descaling the machine to remove limescale.
How to clean the coffee bean containers to maintain freshness.
Indicates the coffee grounds container is full and needs emptying.
Prompt to perform a rinse cycle for the milk system.
Prompt to run the machine cleaning program.
Prompt to perform a descaling cycle.
Notification to replace the external water filter cartridge.
Message indicating insufficient ground coffee for preparation.
Addresses issues with milk frothing quality or milk spraying from the spout.
Solutions for coffee dispensing slowly or in drips.
Troubleshooting errors related to the bean container not being detected or filled.
Guidance for resolving various error codes displayed by the machine.
Procedure to empty the system for frost protection during transport.
Guidelines for environmentally responsible disposal of the old machine.
