7 Maintenance
29
T
Empty the drip tray and coffee grounds container and put them
back into the machine�
‘Descale’
The start screen is displayed�
E If the descaling operation stops unexpectedly, rinse the
water tank thoroughly�
Perform a self-diagnosis of your GIGA on a regular basis to check its
maintenance status�
T
Touch the time area to open the Cockpit�
T
Touch �
The GIGA will now perform a self-diagnosis and list any actions
that need to be taken�
T
Carry out the recommended maintenance actions�
Limescale deposits may form in the water tank� To ensure correct
function of the machine, descale the water tank from time to time�
T
Remove the water tank�
T
If you use a CLARIS Pro Smart
+
filter cartridge, remove this�
T
Completely fill the water tank and dissolve 3 JURA descaling tab-
lets in it�
T
Leave the water tank with the descaling solution for several
hours (e�g� overnight)�
T
Empty the water tank and rinse it thoroughly�
T
If you use a CLARIS Pro Smart
+
filter cartridge, insert this again�
T
Fill the water tank with fresh, cold water and reinsert the tank�
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean containers� These traces may negatively affect
the coffee result� For this reason clean the bean containers from time
to time�
T
Press the On/Off button Q to switch the GIGA off�
T
Switch the machine off at the power switch�
T
Open the service cover on the back of the machine by pressing
above the JURA logo�
T
Push the red sliding catch completely to the rear to close the
bean container�
Performing a self-diagnosis
Descaling the water tank
Cleaning the bean container
To Next Page
Loading...
Need help?
General
