JVA Z14 - Relay Programming

Page 54
© JVA Technologies Pty. Ltd.
Electric Fencing Products
8.6.18  
Command    
Relay 1 2 1 Options Explained under “8.6.19 Relay Functions” Default is 08 # Relay 2 2 2 Options Explained under “8.6.19 Relay Functions” Default is 09 #
Relay 3 (Fitted Z14R only) 2 3 Options Explained under “8.6.19 Relay Functions” Default is 00 # Relay 4 (Fitted Z14R only) 2 4 Options Explained under “8.6.19 Relay Functions” Default is 02 # Relay 5 (Fitted Z14R only) 2 5 Options Explained under “8.6.19 Relay Functions” Default is 07 #
Relay Commands   