Remote Programming
19
VCR codes
The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward,
rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to any
code, try the Search Codes Function, on page 50.
• Some manufacturer’s VCR’s may not respond to the T V / V C R button, even if other buttons work properly.
• To record, hold down the REC button on the remote and press PLAY.
D502/302/202 mini-IB 4/5/01 9:40 AM Page 19
To Next Page
Loading...
Need help?
General
