JVC CA-MXG9BK - Advanced Functions; Tuner and CD Player Operations; Timer and Display Information

RX-MXG9BK
F
TUNER
.
ENTRY
VOLUME
oy a»
G
La
Wi
Tuner/Amplifier
SOURCE indicator
| Tuning indicator
{TIMER] oO
edge (Ba 8os
enc AA /HA AAs
Timer setting
Frequency indicator
fy 6CD player
ia Edit/Recording
Time indicator
track number
program setting
EACH REMAIN
[omer ) > Hein
TOTAL REMAIN
S
1-12 (No.20434)
F. Using the Tuner Entry Function (Tuner/Amplifier)
With Tuner Entry on, the Unit automatically shifts to the most recently played
radio station when a tape or CD comes to an end.(See Page 28 )
¢ Press the TUNER ENTRY button. The LED next to it lights up when Tuner
Entry is on and is off when Tuner Entry is off.
¢ In two situations, even if Tuner Entry is on, it will not take effect:
1) When you intentionally stop the CD or tape deck by pressing the STOP/
CLEAR @ button on the CD player or the HE button on the tape deck.
2) When any timer activated CD or tape stops playing.
G. Using the Edit Functions (CD Player)
By using one of the four Edit Functions, AI Edit, Auto Edit, Program Edit and
Multi Edit, the Unit can figure out how to arrange CD tracks on a tape. When
you are recording a tape from a CD, the selections are not cut off if the tape ends
before the selection does.
H. Using the Timers (Tuner/Amplifier)
The four timers, REC TIMER, ONCE TIMER, DAILY TIMER and WAKE
UP/SLEEP TIMER are extremely easy to set so you can really use them.
I. The Display and the LEDs—Two Very Useful Hints
¢ The display area is large and clear. It's organized so you can tell at a glance
what's happening because functions light up as you use them, and blink to tell
you when they are ready.
* Some of the controls have a small light, called an LED right next to or even
right on the function button 6r knob itself. The light comes on when the
function is on, and goes out when it is not in use.
DIMMER Function (Tuner/Ampilifier)
With this function you can control the display brightness, when the Unit is turned
off.
Press the TUNING/TIMER/DIMMER < or > button.
<: makes the display dimmer
>: makes the display brighter
Graphic Equalizer
Speakers mode
Selected mode SEA preset pattern
manual pattern
Sound level Dolby Pro Logic control
Mood menu DAP/DSEP effects’ level
SEA frequency level
Listening with Headphones
A standard pair of headphones can be connected at the
PHONES jack on the front panel. Be sure to turn down
the volume before connecting or putting on head-
phones, as high volume can damage both the headphones
and your hearing.
Page 10