JVC CA-MXG9BK - Listening to a VCR, Record Player or Other Equipment through Your CA-MXG9 BK

RX-MXG9BK
Listening to a VCR , Record Player or other Equipment through Your CA-MXG9BK
PE
Fo
EE,
|
By playing aVCR, Record Player or other connected equipment through the CA-MXG9BK, you can often dramatically improve the sound quality,
as well as gain control over how the music or program sounds. Once the connected equipment is playing through the CA-MXG9BK, you can apply
the sound effects, make recordings, or listen with the headphones. Here are the steps to take:
1. Makeaconnection between the VCR, Record Player or other equipment
as shown on page 4.
+ Since there are many different types of VCRs and Record Players,
etc., we can’t tell you here just how to make the connections on
the other equipment. However, the diagrams on page 4 will cover
most cases, and you can also look in the instruction manual for the
other equipment you have.
2. Set the Unit's volume to its lowest setting. Use < VOLUME > on the
Remote, or turn the VOLUME control all the way counterclockwise.
3. Select the connected equipment with the source selecting button.
4. Switch on the connected equipment and start it playing.
5. Adjust the VOLUME to a proper listening level.
VOLUME
Page 31
(No.20434) 1-33