JVC CA-TD5 User Manual

QL-
GB lf you try to program a 33rd track, the System Jets you know that the program ts full by displaying the
message “FULL” on the display.
WE if you try to program a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks). the selected disc or track are skipped
when the program is played.
Gi Youcan skip to a particular step in a program during program play. Using the unit. press the right or
left (Had € or > PH) cursor key. to this from the Remote Control, press the ¢ +4 <4 or
Pe Pt > button.
WB You can also repeat a step in a program. See page 27 “Repeating a Track or the Discs”.
To stop playing, press the ™ button.
To delete all the tracks in a program, press the CANCEL button on the Unit repeatedly unul all the
tracks in the program have been deleted, or press the ALL CD EJECT button.
To exit Program mode, press the PLAY MODE button on the Remote Control and select CONTINUE,
or press the MENU button on the Unit and use the cursor keys to select CONTINUE in CD P MODE.
To Check the Program
While the CD Player is stopped, use the kd <4 or B® mH > button on the Remote Control to
check the contents of the program.
Each time you press the > m1 > button on the Remote Control, the program contents are shown on
the display in the programmed order. Pressing the € k@ <4 button on the Remote Control displays
the previous step in the program.
To Modify the Program
Modify the contents of a program while the CD Player 1s stopped.
Press the CANCEL button on the Unit. the last track in the program is deleted.
Each time you press the button, the last track listed tn the program is deleted from the program.
To add a track to the program, follow the procedure above (on either the Unit or the Remote Control}. The
new tracks are added to the end of the program.
Random Play
The tracks will play in no special order when you use this mode.
MB You can use this mode when the CD Player is stopped.
Using the Unit
MENU
“4. Press the MENU button.
The TIMER section of the menu display blinks.
i. Press the cursor key to the right
or left («<4 < or > » i} and select
“CD P.MODE”.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the left (<4 <) cursor key
+ TIMER ++ CD P.MODE + REPEAT «> AUTO EDIT ++ SEA CONTROL +
Press the right (> >) cursor key >
Press the cursor key to the up or CE CERE TE Dba
down {PPA or v << ) and select PoP dew af Late
“RANDOM”. (eenoon
The menu display changes with each press of the RaNooM
cursor keys as shown below.
+ Press the up (»» A) cursor key
— CONTINUE «+ PROGRAM + RANDOM —
Press the down ( v ~4<4) cursor key —
“RANDOM” appears on the display.
| Press the SET button.
The blinking “RANDOM” display changes to
a steady display.
26
; Press the » or CD button.
The tracks are played in random order.
When all of the tracks have been played, the CD Player stops.
Using the Remote Control
PLAY , Press the PLAY MODE button to
select RANDOM.
© “RANDOM” lights up on the display.
The display changes with each press of the PLAY
MODE button as shown.
} Press the » A or CD button.
The tracks are played in random order.
When all of the tracks have been played. the CD Player stops.
Note: Press the DISC (1-3) buttons, or the number keys, to cancel Random play and begin playback in
Continuous Play mode.
@ To instruct the CD Player to continue with a different random selection after the current setting has
finished before starting random play. or while a random selection is playing, see page 27 “Repeating a
Track or the Discs”.
To skip to the next track in the random program, press the > 1 cursor key or > 1 D>
button on the Remote Control.
To cancel random play, press the Ml button, then press the PLAY MODE button on the Remote
Control to select another mode. or press the MENU button on the Unit and use the cursor keys to select a
different made.
Repeating a Track or the Discs
You can have all the dises, the program or the individual track currently playing repeat as many times as
you like.
Using the Unit
4, Press the MENU button.
The TIMER section of the menu display blinks.
ENTER
Press the cursor key to the right
or left (<4 < or > » i) and select
“REPEAT”.
The menu display changes with each press of the
cursor keys as shown below.
+ Press the left (-t<@ <) cursor key
<— TIMER +> CD P.MODE ++ REPEAT «> AUTO EDIT «+ SEA CONTROL +>
Press the right (> ») cursor key >
Press the cursor key to the up or down { »»A or v << ) and select
Repeat mode.
The menu display changes with each press of the cursor keys as shown below.
+ Press the up (> A) cursor key
o- ALL + 1CD << 1 ++ OFF —
Press the down (v <4) cursor key —
ALL: Repeats al] the tracks on the CD's in the CD Player, or all the tracks in the program.
1 CD: Repeats all the tracks on one CD.
1: Repeats one track on a CD.
te
“@. Press the SET button.
27
a areiiiciel
YSSCL-VO/SACL-VO

JVC CA-TD5 Specifications

General

Brand	JVC
Model	CA-TD5
Category	Speaker System
Language	English