29
Preparation Basic Operation Settings Troubleshooting Others
Getting Started
ENGLISH
Item values shown in are factory settings.
z Items that can be configured differ according to the input signals.
z AContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP16)
z ATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal.
* The red, green and blue colors can be adjusted and registered respectively.
z This setting can also be configured from the remote control. (pP16)
Setting Menu
Image>Image Adjust
A Contrast
Adjusts the contrast of the projected image.
(Black) b30 f 30 (White)
B Brightness
Adjusts the brightness of the projected image.
(Darken) b30 f 30 (Brighten)
C Color
Adjusts the color density of the projected image.
(Lighten) b30 f 30 (Darken)
D Tint
Adjusts the hue of the projected image.
(Red) b30 f 30 (Green)
E Sharpness
Adjusts the outline of the projected image.
(Soft) b30 f 30 (Sharp)
F DNR
Adjusts the strength of noise removal of the projected image.
(Weak) 0 f 30 (Strong)
Image>Color Temp.
G Color Temp.
Sets the color temperature of the projected image.
Low Select this to give a reddish tinge to the image.
Middle Select this to have a balanced image.
High Select this to give a bluish tinge to the image.
User10
Red (Less red) b255 f 0 (More red)
Green (Less green) b255 f 0 (More green)
Blue (Less blue) b255 f 0 (More blue)
User20
Red (Less red) b255 f 0 (More red)
Green (Less green) b255 f 0 (More green)
Blue (Less blue) b255 f 0 (More blue)
DLA-HD1D_EN.book Page 29 Tuesday, January 30, 2007 2:54 PM
To Next Page
Loading...
