JVC DLA-HD1 User Manual

37
Preparation Basic Operation Settings Troubleshooting Others
Getting Started
ENGLISH
A Select the image profile
B Adjust image quality
C Register the image profile
a Select ASetupB g AProfile MemoryB
b Register the setting
D To end
Registering User-defined Image Profiles
z See AChanging the Default Image Profile ValuesB for procedures on
adjusting the image quality. (pP36)
z To return to the default values, reset the registered settings with AProfile
MemoryB in the setting menu. (pP31 - L)
z Adjustment settings of image
quality will not be registered if other
image profiles are selected before
registering these settings.
CAUTION
Setup
Image
Video Install. Func. Info.
Image Profile
Profile Memory
Picture Position
HDMI Input Level
Mask
Save User1
Save User2
Save User3
Clear User1
Clear User2
Clear User3
Reset Cinema
Reset Natural
Reset Dynamic
BCONFIRM
ASELECT
Setup
Image
Video Install. Func. Info.
Image Profile
Profile Memory
Picture Position
HDMI Input Level
Mask
Save User1
Save User2
Save User3
Clear User1
Clear User2
Clear User3
Reset Cinema
Reset Natural
Reset Dynamic
BCONFIRM
ASELECT
DLA-HD1D_EN.book Page 37 Tuesday, January 30, 2007 2:54 PM

JVC DLA-HD1 Specifications

General

Projection distance	3.0/6.1 m
Projection technology	DLP
Contrast ratio (typical)	-
Digital zoom	2 x
Focal length range	21.3 - 42.6 mm
Lamp type	UHP
Lamp power	200 W
Light source type	Lamp
RS-232 ports	1
Dimensions (WxDxH)	455 x 172.5 x 418.5 mm
Connectivity technology	Wired
Full HD	Yes
Serial interface type	RS-232
Power consumption (standby)	2.7 W
Market positioning	Home cinema

Weight and Dimensions

Weight	11600 g