EasyManua.ls Logo

JVC DLA-NX9 - User Manual

JVC DLA-NX9
99 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
.
D-ILA
PROJECTOR
DLA-NX9
DLA-NX7
DLA-NX5
.
.
http://manual3.jvckenwood.com/projector/mobile/global/
The Mobile User Guide can be viewed on mobile internet devices including
smartphones and tablets.
Mobile User Guide
This instruction manual is intended for software version 3.50 or later. If you are using an older
software version, please make use of the instruction manual (for software versions up to 3.10)
(B5A-2809-31).
.
Pour utilisation par le client :
Entrerci-dessous le N°de série qui
est situé sous le boîtier. Garder
cetteinformation comme référence
pour le futur.
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
DLA-NX9 K,
DLA-NX7 K,
DLA-NX5 K,
Model No.
Serial No.
N° de modèle
N° de série
Modelo Nº
Nº de serie
Not suitable for household room illumination.
INSTRUCTIONS
B5A-2809-41
Getting Started Set up Operate Adjust/Set Maintenance
Troubleshooting
Others

Table of Contents

Questions and Answers

  • J
    James SullivanSep 2, 2025
    Why is my JVC DLA-NX9 making noise?
    • L
      lfrostSep 2, 2025
      The noise from your JVC Projector may be due to several reasons. Check if the exhaust vent is blocked or if the unit is near a heater or air conditioner; high surrounding temperatures increase the fan speed. If viewing 3D video, the “Lamp Power” is automatically set to “High,” increasing fan noise; you can set it to “Low” if it bothers you. Also, setting “Lamp Power” to “High” manually increases fan speed. The sound could also be from the e-shift operation if the “8K e-shift” setting for “MPC” is switched; this is normal.
  • A
    ashleysandersAug 31, 2025
    How to fix if the video image does not appear on my JVC Projector?
    • S
      sparkschristopherAug 31, 2025
      If the video image does not appear on your JVC Projector, ensure that the correct external input is selected. Check that the AV device or PC is turned on and properly connected, and that it is outputting the correct signals. Verify that you are using an HDMI-certified high-speed cable. If you are using an intermediate device, change the sequence of turning on the source device, intermediate device, and the projector, ensuring that the signal output is stable before turning on the next device. If using an old source device, change the resolution setting or try connecting to the HDMI 2 terminal and set “HDMI 2 EDID” to “B.”
  • S
    samanthaingramAug 29, 2025
    What to do if my JVC Projector remote control does not work?
    • M
      Michael WatsonAug 29, 2025
      If your JVC Projector remote control isn't working, first ensure the batteries are correctly loaded, matching the polarities. If they are, try replacing them with new ones. Also, make sure there's no obstruction between the remote and the projector's sensor, and ensure you're not too far from the unit.
  • L
    Laura BennettAug 28, 2025
    What to do if 3D images do not appear on my JVC Projector?
    • J
      Jesus DiazAug 28, 2025
      If 3D images are not appearing on your JVC Projector, and you see two images side by side, set “3D Format” to “Side by Side”. If you are using an intermediate device, connect the source device directly to the projector. Ensure you're using an HDMI-certified high-speed cable. If using PK-AG2 or PK-AG3 3D Glasses, turn them on manually. Check if the 3D Glasses are charged. Make sure the 3D Glasses and 3D Synchro Emitter are at an appropriate distance and that you're using the correct combination of glasses and emitter.
  • K
    Kevin WaltersAug 26, 2025
    Why is there noise coming from my JVC DLA-NX9?
    • D
      Dennis WhiteAug 27, 2025
      If you hear noise from your JVC Projector, check that the exhaust vent isn't blocked and that the unit isn't near a heater or air conditioner. High surrounding temperatures can cause the fan to speed up. If viewing 3D video, “Lamp Power” may be set to “High,” increasing fan noise; set it to “Low” if it bothers you. Also, the sound could be from the “8K e-shift” operation within “MPC,” which is normal.
  • M
    Mallory ZimmermanAug 25, 2025
    How to troubleshoot power not being supplied to my JVC DLA-NX9?
    • L
      lancedavisAug 25, 2025
      If your JVC Projector isn't getting power, first, make sure the power cord is firmly plugged in. Check that the lamp cover is properly shut. If the unit is in Cool-down mode, wait for it to exit, then try turning it on again. Also, if the unit is in Eco mode, press the A button on the projector or remote, and then press the C [ON] button after the “STANDBY/ON” indicator lights up red.
  • M
    mphelpsAug 22, 2025
    Why does my JVC DLA-NX9 Projector power shut down automatically?
    • T
      Taylor RichardAug 22, 2025
      If your JVC Projector is automatically shutting down, it might be due to the ECO Mode or Off Timer being enabled; set both to “Off.” Another cause could be blocked air inlets and exhaust vents, so ensure proper clearance around the unit. Also, a dirty sponge filter can cause this issue; clean it with a vacuum cleaner.

JVC DLA-NX9 Specifications

General IconGeneral
Brightness2200 lumens
Contrast Ratio (Native)100, 000:1
Contrast Ratio (Dynamic)1, 000, 000:1
3DYes
Color SpaceDCI-P3
Projector TypeHome Theater
Light SourceLamp
Lens ShiftHorizontal: ±34%
HDMI Inputs2
HDR SupportHDR10, HLG
InputsHDMI, RS-232C, LAN
Dimensions (W x H x D)500 x 234 x 520 mm

Related product manuals