JVC DLA-RS1 - Profile Memory, Picture Position, and HDMI Input Level; Mask Settings and Component;RGB Input Configuration

27
Preparation Basic Operation Settings Troubleshooting OthersGetting Started
ENGLISH
z AContrastB, ABrightnessB, AColorB, ASharpnessB, ADNRB, AColor Temp.B, AGammaB and AOffsetB are registered in AImage
ProfileB.
z The display position value varies with the input signal.
z This adjustment is available only for analog input signals.
z This setting is available only when projecting the HDMI input.
z Masking is available only when high definition images are input.
z This setting is available only when projecting the component video input.
Setup>Profile Memory
L Profile Memory
Registers or deletes image profiles.
Save User1 Registers image profile in AUser1B.
Save User2 Registers image profile in AUser2B.
Save User3 Registers image profile in AUser3B.
Clear User1 Returns image profile in AUser1B to factory setting (natural).
Clear User2 Returns image profile in AUser2B to factory setting (natural).
Clear User3 Returns image profile in AUser3B to factory setting (natural).
Reset Cinema Returns image profile in ACinemaB to factory setting.
Reset Natural Returns image profile in ANaturalB to factory setting.
Reset Dynamic Returns image profile in ADynamicB to factory setting.
Setup>Picture Position
M Picture Position
Adjusts the horizontal/vertical position of the projected image.
Setup>HDMI Input Level
N HDMI Input Level
Configures the input level setting of the HDMI input terminal.
Standard For normal circumstances, select this setting.
Enhanced
Select this setting when the black-and-white of the projected image is unclear when
RGB video signals are input from DVI devices.
Setup>Mask
O Mask
Masks (Hides) the outer area of the projected image.
2.5% Masks 2.5 % of the screen.
5% Masks 5 % of the screen.
Off No masking.
Video>COMP
P COMP
Configures the input signals of the component video input terminals.
Y Pb/Cb Pr/Cr Select this when component video signals are input.
RGB Select this when RGB video signals are input.
SCART
Select this when RGB video signals and sync signals are input from SCART plug for
European market.
DLA-RS1_EN.book Page 27 Wednesday, January 24, 2007 9:23 AM
Downloaded From projector-manual.com JVC Manuals