41
Getting Started Preparation Basic Operation Settings Troubleshooting Others
ENGLISH
Cleaning and Replacing the Filter
A Remove the inner filter
B Clean the filter
C Reinstall the inner filter
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
z Wash the filter with water and dry it in a shaded area.
z In extremely soiled cases, use of a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
z After washing the filter with water, make sure that it is completely dry before
reinstalling. Otherwise, electric shocks or malfunctions may occur.
z Do not clean the filter with a vacuum cleaner or air duster. The filter is soft
and may be damaged.
Lift up while pushing the claw
z Pull the power plug from the power
outlet.
If the filter is damaged or too
dirty to be cleaned
z
Replace with a new filter. A dirty
filter will dirty the internal parts of
the unit and cause shadows on the
video image.
z To purchase a new filter or when
there is dirt in the internal parts,
consult your authorized dealer.
Inner Filter
Part No. : LC32058-002A
CAUTION
MEMO
Check that the left and right
claws are locked onto the unit
DLA-RS1_EN.book Page 41 Wednesday, January 24, 2007 9:23 AM
Downloaded From projector-manual.com JVC Manuals
To Next Page
Loading...
