JVC DLA-X3 User Manual (English)

Other manuals for JVC DLA-X3

Instructions79 pages

Firmware Update Instructions6 pages

Questions and Answers:

N
Nathan McdanielAug 20, 2025
Why is my JVC DLA-X3 Projector video image not appearing?
- S
  Summer KimAug 20, 2025
  There could be several reasons why the video image is not appearing on your JVC Projector: * The correct external input may not be selected. Ensure that you select the correct external input. * The AV device might not be properly connected. Connect the AV device properly. * The AV device may not be turned on. Turn on the power of the AV device and play the video. * The correct signals might not be output from the AV device. Set the AV device properly. * The setting of the input terminal may not be correct. Set “COMP.” and “HDMI” in the setting menu according to the input signal. * The video image may be temporarily hidden. Press the [HIDE] button to display the video image again.
H
Heather FlynnAug 22, 2025
How to fix JVC Projector when power is not supplied?
- E
  Eric WattsAug 22, 2025
  If your JVC Projector is not receiving power, here are a few things to check: * Ensure the power cord is fully inserted into the outlet. * Make sure the lamp cover is properly shut. If it is not, remove the power plug when the unit is in standby mode, close the lamp cover properly, and then reinsert the plug. * If the lamp is in Cool Down mode, wait until it is complete, then turn the power on again.
A
Anna AdamsAug 25, 2025
What to do if JVC DLA-X3 remote control does not work?
- S
  Sherry EvansAug 25, 2025
  If the remote control for your JVC Projector is not working, consider the following: * Check if the batteries are installed correctly, matching the polarities (+ and -) when inserting them. * Replace the batteries with new ones if they are exhausted. * Ensure there are no obstructions between the remote control and the remote sensor. Remove any objects that might be blocking the signal. * Make sure you are not holding the remote control too far away from the unit. Hold it closer to the sensor when using.
D
david41Aug 26, 2025
Why does my JVC Projector turn on but stops after a few minutes?
- M
  martinezvictorAug 26, 2025
  If your JVC Projector turns on but stops abruptly after a few minutes, the issue might be due to: * Blocked air inlets and exhaust vents. Remove the power plug when the unit is in standby mode and remove any blocking object. After that, insert the plug again. * A dirty filter. Clean the filter to ensure proper ventilation.
A
Alexander DanielsAug 28, 2025
Why is my JVC DLA-X3 image fuzzy?
- J
  Jasmine GonzalezAug 28, 2025
  If the video image on your JVC Projector appears fuzzy, it could be due to: * Incorrect focus adjustment. Adjust the focus until the image is clear. * Incorrect distance from the screen. Set the unit at a correct distance from the screen.
P
pattersonrobertAug 29, 2025
Why is my JVC DLA-X3 Projector image dark?
- M
  monicarollinsAug 29, 2025
  If the projected image from your JVC Projector is dark, it might be because the lamp is near exhaustion. Check the lamp time on the information menu and prepare to replace the lamp as soon as possible.
D
douglas92Aug 31, 2025
What to do if JVC DLA-X3 Projector image cannot output by HDMI terminal?
- J
  jonathonbartlettAug 31, 2025
  If the image cannot be output by the HDMI terminal on your JVC Projector, check if the “Control with HDMI” function is set to “Off.” If it is, set up the “Control with HDMI” function to “Off.”
M
Michelle RamirezSep 2, 2025
Why does the color not appear correctly on my JVC DLA-X3?
- D
  dawnperkinsSep 2, 2025
  If the color on your JVC Projector does not appear correctly or looks strange, adjust “Color” and “Tint” in the setting menu.
J
James WilliamsSep 4, 2025
What to do if the video image does not appear on my JVC Projector?
- A
  Andrew RileySep 4, 2025
  If the video image does not appear on your JVC Projector, first ensure that you have selected the correct external input. Then, verify that the AV device is properly connected and powered on, and that it is outputting the correct signals. Check the input terminal settings, setting “COMP.” and “HDMI” in the setting menu according to the input signal. Finally, if the video image is temporarily hidden, press the [HIDE] button to display it again.
A
Alyssa NolanSep 6, 2025
Why doesn't the remote control work for my JVC Projector?
- T
  Timothy VillanuevaSep 7, 2025
  If your JVC Projector's remote control isn't working, make sure the batteries are installed with the correct polarities (+ and -). If they are, try replacing them with new batteries. Also, ensure there are no obstructions between the remote control and the projector's remote sensor. Finally, make sure you are not holding the remote too far away from the unit.