To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my JVC Projector stops after a few minutes?
If your JVC Projector abruptly stops after a few minutes, it might be due to blocked air inlets and exhaust vents. Remove the power plug when the unit is in standby mode, clear any obstructions, and then reinsert the plug. Also, a dirty filter can cause this issue, so try cleaning the filter.
How to troubleshoot power issues with my JVC DLA-X3?
If your JVC Projector isn't receiving power, start by checking if the power cord is fully connected. If it is, ensure that the lamp cover is properly shut. Remove the power plug when the unit is in standby mode and close the lamp cover properly, then reinsert the plug. Finally, if the lamp is in Cool Down mode, wait until it's complete before turning the power on again.
Why is the video image fuzzy on my JVC DLA-X3?
If your JVC Projector's projected image is fuzzy, first adjust the focus. If the image remains unclear, ensure the unit is placed at the correct distance from the screen.
Why is the projected image dark on my JVC DLA-X3?
If the projected image from your JVC Projector appears dark, check the lamp time in the information menu. If the lamp is near exhaustion, prepare to replace it as soon as possible.
How to fix color issues on my JVC Projector?
If the color on your JVC Projector does not appear correctly or looks strange, adjust the “Color” and “Tint” settings in the setting menu.
General
