MPC Level
You can enjoy natural, expressive 4K images with a stronger sense of depth.
Æ “Adjusting Movies for Increased Expressiveness (Multiple Pixel Control)” （p. 39）
4K e-shift
Switches the display resolution.
0
Setting values: On (4K), Off (2K)
Original Resolution
For selecting a resolution for the content you are viewing.
0
Setting values: Auto, 4K, 1080p, 1080i/720p, and 480p
* The
default “Original Resolution” setting is “Auto”, which switches the resolution automatically according to the type
of signal input.
Enhance
For adjusting the high-frequency areas. Increasing the value enhances the definition for a sharper image quality.
0
Setting range: 0 to 100
Dynamic Contrast
For adjusting the medium-frequency areas. Increasing the value enhances the contrast for a more dynamic image
quality.
0
Setting range: 0 to 100
Smoothing
For adjusting the low-frequency areas. Increasing the value enhances the blurriness of the image for a softer effect.
0
Setting range: 0 to 100
NR
Prevents noise from becoming too pronounced.
0
Setting range: 0 (weak) to 10 (strong)
Clear Motion Drive
For reducing the after-image, which occurs in a fast-moving scene.
Æ “Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))” （p. 44）
Brightness
For adjusting the brightness of the video image.
0
Setting range: -50 (darker) to +50 (brighter)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Contrast
For adjusting the difference in brightness to produce an image with contrast.
0
Setting range: -50 (little difference in brightness) to +50 (large difference in brightness)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
Color
For adjusting the color density of the video image.
0
Setting range: -50 (lighter) to +50 (deeper)
* Adjustment cannot be made when “Color Profile” is set to “x.v.Color”.
49
Adjust/Set
To Next Page
Loading...
