EasyManua.ls Logo

JVC DLA-X900R

JVC DLA-X900R
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth.
1
Press the [MPC] button to display the
adjustment menu
0
You can also perform setting from “Picture
Adjust”"“MPC Level” in the menu.
.
>>
MENU
BACK
0
0
0
0
INPUT
Back
Operate
Select
Exit
Auto
On
Before Reset
NR
Smoothing
Dynamic Contrast
Enhance
Original Resolution
4K e-shift
MPC Level
Picture Adjust
2
Make adjustments according to your
preference based on the setting
of the
selected “Picture Mode”
* The factory setting varies with the “Picture
Mode”.
Item Setting Description
4K e-shift On (4K)/Off
(2K)
Switches the display
resolution.
Original
Resolution
Auto/4K/
1080p/
1080i/720p/
480p
For selecting a resolution for
the content you are viewing.
Enhance 0 to 100 Enhances the sharpness of
the image.
Dynamic
Contrast
0 to 100 Enhances the contrast of the
image.
Smoothing 0 to 100 Enhances the blurriness of
the image for a softer effect.
NR 0 to 10 For reducing the noise of the
video image.
0
In the default “Original Resolution”
setting (“Auto”), the
resolution is set automatically.
0
By increasing the setting range, you can expect
enhanced effects.
0
Images are displayed in the original resolution (2K)
when “4K e-shift” is set to “Off”.
0
The setting is fixed at “On” during 4K signal input.
0
During
3D signal input and
when “2D to 3D conversion”
is set to “On”, the setting is fixed at “Off”.
0
“Original Resolution”, “Zone”, “Enhance”, “Dynamic
Contrast”, and “NR” can be
adjusted even when “4K e-
shift” is set to “Off”.
* MPC is the abbreviation for Multiple Pixel Control.
3
Press the [MENU] button to exit
Toggling between the States before
and after Adjustment
Pressing the [BEFORE/AFTER] button on the remote
control enables you to toggle between the states before
adjustment (BEFORE) and after adjustment (AFTER).
39
Adjust/Set

Table of Contents

Other manuals for JVC DLA-X900R

Related product manuals