EN 9
To protect the lens, attach the provided lens cap to the camera as shown in the illustration.
Attach the core filters to the cables.
The core filter reduces interference.
When connecting a cable, attach the
end with the core filter to the camera.
Attachment positions (墌 right)
Attaching the Shoulder Strap
Attaching the Lens Cap
Attaching the Core Filter
Buckle
Strap Guide
Eyelet
Peel off the pad and thread the
end of the strap through the
eyelet.
Thread the strap through the
buckle, adjust its length, and use
the strap guide to fix it in place.
Position the buckle near the
eyelet and reattach the pad.
Place here during
recording.
Large (A)
Small
USB Cable
AC Adapter
Large (B)
AV Cable
DC Cord
Release the stopper.
3 cm
Wind once.
GETTING STARTED
M6E3PAL.book Page 9 Friday, June 2, 2006 4:56 PM
To Next Page
Loading...
Need help?
General