Back Exit
Mode
Mono
SSM
PTy Standby
PTy Code
Start
News
Exit
OPERATIONS
17
ENGLISH
Activating/deactivating TA/PTY
Standby Reception
TA Standby Reception Indicator
Press on the monitor panel to
activate.
TP
The unit will temporarily switch to
Traffic Announcement (TA) if available,
from any source other than AM.
• The volume changes to the preset
TA volume level if the current level is
lower than the preset level (☞ page
63).
Lights up
Not yet activated. Tune in to another
station providing the RDS signals.
Flashes
Press
to deactivate.
Goes off
PTY Standby Reception Indicator
To activate, display < AV Menu>
screen, press [Mode], then press
[On] for < PTy Standby>. (☞ next
column)
PTY
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM.
Lights up
Not yet activated. Tune in to another
station providing the RDS signals.
Flashes
To deactivate, press [Off] for < PTy
Standby> in step 3 on the next
column.
Goes off
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
To activate PTY Standby Reception
1
2
3
searches for the services.
PTY Standby Reception is now activated for PTY
code <News>: the initial setting.
By pressing Short Cut icon, you can activate
or deactivate PTY Standby Reception.
Continued on the next page
EN_KW-AVX810[E]f.indb 17EN_KW-AVX810[E]f.indb 17 08.1.25 7:45:47 PM08.1.25 7:45:47 PM
To Next Page
Loading...
