JVC EXAD KW-AVX810

Connected Device Name
EXTERNAL DEVICES
ENGLISH
43
1
* Indicates the button pressed. It may be different from the operation status.
2
* This button appears when the Bluetooth Adapter is connected.
3
* You cannot select “NEW DEVICE” when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO( ]. ☞ page 11)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
• See page 37 for connecting a new device.
• See page 38 for connecting/disconnecting a
registered device.
• See page 38 for deleting a registered device.
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
Starts and pause playback.
Reverse/forward skip
Status of the device
Adjusts the volume.
Signal strength/Battery
remainder (only when
the information comes
from the device)
Sound mode
1
*
(☞ page 57)
The Bluetooth icon
lights up when the
Using the Bluetooth audio player
adapter is connected.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
[ / ] [
3 8 7
jvc-victor.co.jp/english/car/>
] Starts playback/pauses
[4 ¢
] Reverse/forward search
[5 ∞] Selects the registered device
3
(“NEW DEVICE” appears when a new device) can be registered.*
[
] Displays < Dial Menu
2
*
> screen
EN_KW-AVX810[E]f.indb 43EN_KW-AVX810[E]f.indb 43 08.1.25 7:46:01 PM08.1.25 7:46:01 PM