To Next Page

To Previous Page

The rst time you switch your TV on it will automatically be in the initial setup mode. This will guide you through the whole setup process of selecting your desired

language, connecting to the internet, signing in to your Amazon account and tuning in TV channels.

Choosing your language

1. Press the buttons to highlight

your LANGUAGE then press the

SELECT button.

2. Your remote control should

automatically pair, but if it hasn’t

press and hold the HOME button to

pair it.

Make sure your TV

is as close to your

router as possible,

within 5m and

ideally in the same

room as the TV

Best connection

speed

Maximum distance

Wireless Router Wireless Router

Connecting to the Internet - Wired, Wireless or using the WPS button

WIRED Connection

• If you have connected your ethernet cable to the LAN socket on the back of your TV, your TV will automatically connect to the internet. You'll now be asked to

WIRELESS Connection

You can connect using a wireless connection via your router.

1. Your TV will automatically scan for

your wireless network, then show

you a list of networks that its found.

Highlight your network and press

the SELECT button.

2. Enter your Wi-Fi password, then

highlight Connect and press the

SELECT button.

In a second or two your TV will show

Connecton Successful.