JVC GC-FM1

10
1
Press the
<
button for more than 1 second.
The power lamp turns on.
2
To turn o the power, press the
<
button again.
The power lamp goes o.
NOTE
• To conserve power, the camcorder turns o automatically if there is no operation for
3 minutes.
• If the only operation is turning on the power, the camcorder enters the video recording
ready status.
• When you rst turn on the power after purchasing the camcorder, the [Time setup] screen
appears. Set the date and time before using the camcorder. (Z p. 11)
Turning the Power On and O
Operation-conrmed SD cards
Operations are conrmed on the following SD cards. Panasonic, TOSHIBA, SanDisk, ATP.
Video recording: Class 4 or higher compatible SDHC card (4 GB to 32 GB)
Still image recording: SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)
* If other media are used, they may fail to record data correctly, or they may lose data that had
already been recorded.
Preparation: Turn o the camcorder.
1
Unlock the SD card slot and open the cover.
2
Insert an SD card.
3
Return the cover of the SD card slot and
lock it.
NOTE
• When the SD card is removed or inserted, the power turns o.
Turn o the power before inserting the card.
• When an SD card is inserted, the SD card is prioritized as the destination for data saving.
Inserting an SD Card