JVC GC-FM1

12
Setting the Video Output
Preparation:
Turn on the power and select the recording mode.
1
While pressing the
$
button, press the
7
button.
2
Press the
¡
,
¢
buttons to select [Video
out], and then press the set button.
3
Press the
¡
,
¢
buttons to select [NTSC]
or [PAL], and then press the set button.
To quit the screen 8
Select [Exit], and then press the set button.
NOTE
• Set the camcorder’s video output to the system that is appropriate for your TV.
NTSC: Japan, USA, South Korea, etc. PAL: Europe, China, etc.
Viewing the rmware version of the unit
You can conrm the rmware version of the unit.
1) While pressing the $ button, press the
7 button.
2) Press the ¡ , ¢ buttons to select
[Firmware version], and then press the
set button.
To quit the screen
8
Select [Exit], and then press the set button.
Necessary Settings before Use (Continued)