24 EN
Menus For Detailed Adjustment
The “SYSTEM” functions which are set when the Power Switch is set to “REC” are also applied
when the Power switch is set to “PLAY”.
Menus Settings: [ ] = Factory-preset
SYSTEM
LANGUAGE [ENGLISH] / FRANCAIS / ESPAÑOL / ITALIANO / NEDERLANDS
The language setting can be changed. (墌 14)
MELODY OFF: Disengages the function.
[ON]: A melody sounds when any operation is performed.
DEMO MODE OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Wipe/Fader and
Effect, etc., and can be used to confirm how these functions
operate. Demonstration starts in the following cases:
● When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
● With “DEMO MODE” set to “ON”, if there is no operation for about
3 minutes after the Power Switch is set to “REC”.
● Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more than 3
minutes after that, the demonstration will resume.
Note:
If a cassette is in the camcorder, the demonstration cannot be turned on.
CAM RESET [CANCEL]: Does not reset all settings to the factory-preset.
EXECUTE: Resets all settings to the factory-preset.
GR-DA20EK.book Page 24 Thursday, August 2, 2007 12:08 PM
To Next Page
Loading...
