EN 25
MasterPage: Start_Right
Menus For Detailed Adjustment
ENGLISH
The settings below are effective only for video playback.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made,
and plays the sound back. Select the type of sound to accompany your playback picture.
Each setting (except “OFF” in “ON SCREEN”, “DATE/TIME”, and “TIME CODE”) is linked with
“DISPLAY”, which appears when the Power Switch is set to “REC”.
The parameters (except “OFF” in “ON SCREEN” setting) are the same as in the description on.
(墌 23)
Each setting (except “DEMO MODE”) is linked with “SYSTEM”, which appears when the Power Switch is
set to “REC”.
The parameters are the same as in the description on page 墌 24.
Playback Menus
Menus Settings: [ ] = Factory-preset
TAPE
NARRATION Although it is not possible to perform audio dubbing with this
camcorder, you can hear sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both “L” and “R” channels in
stereo.
ON: Dubbed sound is output on both “L” and “R” channels in
stereo.
MIX: Original and dubbed sounds are combined and output in
stereo on both “L” and “R” channels.
SOUND L/R [STEREO ]: Sound is output on both “L” and “R” channels in stereo.
SOUND L : Sound from the “L” channel is output.
SOUND R : Sound from the “R” channel is output.
BLANK
SEARCH
[CANCEL] / EXECUTE 墌 19, “Blank search”.
Menus Settings: [ ] = Factory-preset
DISPLAY
ON SCREEN OFF / [LCD] / LCD/TV
When set to “OFF”, the camcorder’s display disappears.
DATE/TIME [OFF] / ON
CLOCK ADJ. 墌 14, “Date/Time Settings”
TIME CODE [OFF] / ON
墌 17, “Time Code”
16:9
OUTPUT
[4:3TV] / 16:9 TV
墌 23, “16:9 OUTPUT”
BRIGHT 墌 15, “Brightness Adjustment Of The Display”
SYSTEM
GR-DA20EK.book Page 25 Thursday, August 2, 2007 12:08 PM
To Next Page
Loading...
Need help?
General
