40 EN
A
B
1
1
2
3
1
2
3
1
+
–
+
–
1
2
3
USING THE REMOTE CONTROL UNIT
(cont.)
Installing The Battery
(RM-V700U, optional)
The remote control uses one lithium battery (CR2025).
1
: Pull out the battery holder while sliding the lock
hole.
: Pinch the release tab and pull out the battery
holder.
2
Insert the battery in the holder, and be sure to have
the “+” mark visible.
3
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
( pg. 2).
Installing The Batteries
(RM-V716U , provided with
GR-SXM460A/SXM46EA only)
The remote control uses two ”R03 (AAA)” size batteries.
See “General Battery Precautions” ( pg. 49).
1
Open the battery compartment cover as illustrated.
2
Insert two ”R03 (AAA)” size batteries in the correct
direction.
3
Replace the battery compartment cover.
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
Transmitted beam
effective area
Remote sensor
Lock hole
Knob
Tab
To Next Page
Loading...
Need help?
General
