44 EN
VCR CODE LIST
6 2
6 4
7 7
MITSUBISHI 6 7
6 8
NEC 3 7
3 8
GRUNDIG 1 4
3 4
HITACHI 6 6
6 3
PANASONIC 1 3
1 7
1 1
9 4
1 8
JVC 9 1
9 6
9 3
BLAUPUNKT
AKAI
9 7
9 8
3 2
FERGUSON
1 3
A
B
C
VCR BRAND
NAME
BUTTONS
(A) (B)
SANYO 3 6
3 5
SHARP 1 5
1 `
TOSHIBA 6 9
6 1
SONY
6 5
6 `
3 9
3 1
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
9 1
9 6
9 7
3 2
SELECO,
REX
9 1
9 6
PHILIPS
1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
7 2
VCR BRAND
NAME
BUTTONS
(A) (B)
1
2 3
4
5 6
7
8
9
0
VCR CTL
3
1
6
789`
4
2
5
SHIFT
MBR SET
VCR (Recording deck)
RM-V700U
(optional)
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the RM-V716U/RM-
V700U MBR (Multi-Brand Remote, pg. 38, 39) is
set to operate with your brand of VCR (see VCR
CODE LIST), but can also be performed by operating
the VCR manually.
Before operation, make sure the lithium battery is
installed in the remote control RM-V716U/RM-
V700U ( pg. 40).
SET REMOTE/VCR CODE
1
Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and press button (A) and then (B).
•The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
2
Make sure the VCR’s power is on. Then, while
holding SHIFT (RM-V716U)/VCR CTL (RM-
V700U), press the button on the remote for the
desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and
VCR REC STBY (you do not need to press SHIFT
(RM-V716U)/VCR CTL (RM-V700U) for this
one).
You are now ready to try Random Assemble
Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
NOTES:
●
If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
●
Some brands of VCR do not come on automati-
cally. In this case, turn the power on manually and
try step 2.
●
If the remote control is not able to control the VCR,
use the controls on the VCR.
●
When the remote control’s battery runs out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
and reset the VCR brand.
USING THE REMOTE CONTROL UNIT
(cont.)
RM-V716U
(provided with
GR-SXM460A/
SXM46EA only)
OR
To Next Page
Loading...
Need help?
General
