Need help?Do you have a question about the JVC GR-SXM730U and is the answer not in the manual?
General| Type | Camcorder |
|---|---|
| Brand | JVC |
| Model | GR-SXM730U |
| Image Sensor | 1/4" CCD |
| Minimum Illumination | 1 Lux |
| Shooting Modes | Auto, Manual |
| Microphone Operation Mode | Stereo |
| LCD Screen Size | 2.5 inches |
| Viewfinder Type | Color |
| Power Supply | AC Adapter, Battery Pack |
| Focus Adjustment | Manual / Auto |
| White Balance | Auto, Manual |
| White Balance Presets | Fluorescent |
Step-by-step guide for removing and reattaching external cabinet components.
Procedure for disassembling internal camera and deck modules.
Detailed instructions for dismantling camera and deck internal sections.
Procedures for removing, installing, and replacing the CCD image sensor.
Precautions for handling parts and performing adjustments on the mechanism.
Step-by-step procedures for disassembling and assembling mechanism components.
Procedures for checking and adjusting the phase alignment of mechanism parts.
Procedures for adjusting tape tension, pattern, head height, and phase.
Procedure for adjusting the tape pattern for optimal playback.
Procedure for adjusting the audio and CTL head alignment.
Precautions, required equipment, and setup for electrical adjustments.
Procedure for adjusting the monitor's V COM setting for optimal display.
Procedures for adjusting tilt, centering, scanning, brightness, and focus.
Schematic for the mechanism control and motor drive circuits.
Schematic detailing the VTR Digital Signal Processor section.
Schematic for the Digital Signal Processor and related components.
Schematic for the lens iris, auto-focus, and zoom control systems.
Schematic detailing the power supply regulator circuits.
Schematic for the LCD controller section.
Layout and component placement for the main circuit board.
List of electrical components, including ICs, transistors, and resistors.
To Next Page
