JVC GR-SXM730U - Jack and CCD Schematic Diagrams

5
4
3
2
1
A
B
C
DEF
G
H
4.12 JACK AND CCD SCHEMATIC DIAGRAMS
4-25
4-26
— JACK —
— CCD —
NOTES: For the destination of each signal and further line connections that are cut off from
this diagram, refer to “4.1 BOARD INTERCONNECTIONS”.
When ordering parts, be sure to order according to the Part Number indicated in the Parts List.
Note: IC5301 is incorporated in the CCD base assembly.
When IC5301 needs replacement, replace the CCD base
assembly in whole because it cannot be replaced alone.