3. Supported control from the RM-LP250S and RM-LP250M, IP Remote controller.
Supported RM-LP250S and RM-LP250M, New IP Remote controller of CONNECTED CAM
STUDIO series. It enables Iris and Color etc control via IP.
It needs to match camera setting of “User “ and “Password” for Web access with those of
RM-LP250S/M. Check Iris control enables from RM-LP250S/M after turning power ON the camera.
When camera crew control IRIS, shut the network connection (setting Network Off) and
Operate (1) or (2)
(1) Reboot the camera.
(2) Put “Full auto” button On/Off Push the button twice
See Instructions Manual of RM-LP250S/M on operation of Remote controller.
To Next Page
Loading...
