JVC GY-HM200E - Display Settings Item

Display Settings Item
This menu is used to set the displays on the LCD
monitor and viewfinder screen.
Zoom
For setting the display method of the zoom
position.
0
Number:
Displays the zoom position in numbers (0-99).
0
Bar:
Displays the zoom position in a bar.
0
Off:
Does not display the zoom position.
[Setting Values: Number, RBar, Off]
Focus
For setting the display method of the approximate
distance to the subject in focus during manual
focus.
0
Feet:
Displays the distance in feet.
0
Meter:
Displays the distance in meters.
0
Off:
Hides the distance.
[Setting Values: Feet, RMeter, Off]
WB Indicator
When “On”
is selected and WB is set manually, the
difference in value with the Auto WB is displayed
as an icon on the screen.
(Example) When 3200K is selected
<●3200K> : Appropriate with respect to the
color temperature setting
<▲3200K> : High with respect to the color
temperature setting
<▼3200K> : Low with respect to the color
temperature setting
[Setting Values: ROn, Off]
ND Filter
For setting whether to display the filter position.
0
On+Assist:
Displays the current filter position.
If the ND filter setting is inappropriate, the
appropriate ND filter to select will appear
blinking.
0
On:
Displays the current filter position.
0
Off:
Hides the filter position.
[Setting Values: On+Assist, ROn, Off]
Record Format
For setting whether to display the video format
during recording or playback.
[Setting Values: ROn, Off]
Media Remain
For
setting whether to display the remaining space
of the recording SD card.
[Setting Values: ROn, Off]
Memo :
0
When the remaining space warning is
displayed, the information appears even when
“Off
” is selected.
0
The displayed time is an estimate.
TC/UB
For specifying whether to display the time code
(TC)
or user’s bit (UB) rate in the display on the LCD
monitor and viewfinder screen.
[Setting Values: UB, RTC, Off]
Audio Meter
For specifying whether to display the audio level
meter on the LCD monitor and viewfinder screen.
[Setting Values: ROn, Off]
Battery
For setting the display of the remaining battery
power in the display on the LCD monitor and
viewfinder screen.
The battery information appears only on the
Display 2 screen in Camera mode.
(A P127
[Display 2 screen] )
0
Time:
Displays the remaining battery power in
minutes. (min)
0
Capacity%:
Displays the remaining battery power in
percentage. (%)
0
Voltage:
Displays the current battery voltage in units of
0.1 V. (V)
0
Off:
The remaining battery power is not displayed.
[Setting Values: RTime, Capacity%, Voltage, Off]
LCD/VF Menu
107
Menu Display and Detailed Settings